Bluelab Dosetronic Peridoser Kit Manual de usuario descargar pdf (Pagina 31)

Version P1.3 : 151012

Bluelab Dosetronic Peridoser Kit

Bluelab Corporation LimitedBluelab Corporation Limited

3.11 Control

Control mode monitors your

Actual readings and adjusts them

to the Required values you have

programmed in the Required/

alarms mode. It does this through

the dosing systems installed.

Note: It is advised that you go

through “Preparing system to

run” in the next chapter before

setting the system in control

mode.

1. Select Control

Press up and down keys to

select mode.

2. Controller will adjust nutrient,

pH and temperature levels

accordingly.

When the system is dosing and

the values are being adjusted

the control direction indicator

lights will ﬂ ash.

6.5

6.8

1.3

Actual Required

0.1

Note: If an actual value is ﬂ ashing

in control mode and your dosing

system is not dosing it may be

because the value is outside of

the control range. This can be

changed by manually increasing

your nutrient levels in the stock

tank. For more information see the

troubleshooting section.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

Sin comentarios

Bluelab Dosetronic Peridoser Kit Manual de usuario Pagina 31